AAC Block Manufacturing Lines:
Leveraging on our immense market experience, we have emerged as an eminent manufacturer, exporter and supplier of AAC Block Manufacturing Lines. Our provided lines are best suitable for the composition of AAC blocks (autoclaved aerated concrete) that is widely used in the construction of buildings. These manufacturing lines are made with the utilization of fine grade components under the strict direction of experienced professionals. Offered AAC Block Manufacturing Lines are immensely preferable and demanded due to their high production capacity.
Features of AAC Block Manufacturing Lines:
Specifications of AAC Block Manufacturing Lines:
AAC is Autoclaved Aerated Concrete. The blocks are made to aerate by creating a reaction between silica in base material such as fly ash or sand, active lime, and aluminum power. The block hardness is being achieved by cement strength, and instant curing mechanism by autoclaving. Gypsum acts as a long term strength gainer.
The finished product is a 2.5 times lighter Block compared to conventional Bricks, while providing the similar strengths. The specific gravity stays around 0.6 to 0.65. This is one single most USP of the AAC blocks, because by using these blocks in structural buildings, the builder saves around 30 to 35 % of structural steel, and concrete, as these blocks reduce the dead load on the building significantly.
The major raw material Fly-Ash, an indispensable by-product of Thermal Power Plants, is an environmental threat across the globe. Power plants are facing an ever increasing challenge disposal of this polluting agent. This unit is proposed to manufacture AAC Bricks & Blocks by consuming the Fly-Ash as one of the prime raw material. Secondly, it also helps environment by saving the invaluable top soil by not using them in brick making like conventional brick making. Thirdly, they need no burning, thus further enhancing their Eco-Friendly Brand. The steam curing requires far less fuel, compared to the backing for each cubic meter of Bricks. This is the reason these bricks are also referred as Eco Bricks or popularly Green Bricks, (though the color is gray). AAC Blocks are largely used in various constructions, such as load bearing and pillar structure Buildings, Boundary walls, Roads, Culverts, Pavements, and wherever conventional bricks can be used. The general AAC blocks fall in the strength zone of 30- 60 Kg/Cm2, thus is having comparable strength as conventional Bricks, and hollow concrete blocks. These Blocks gain strength over a period of time up to 2 years, whereas the conventional bricks tend to lose strength over a period of time.
We provide complete consultancy for AAC Block Manufacturing Lines with with local support in your pre planning, machinery selection, technical guidance in installation, operation training, successful production and also in after sales service and warranty.